1-844-363-7266
1. Transmits Ethernet from the elevator cab to the machine room over one shielded twisted pair (the standard wiring installed in the traveling cable)
2. Extends Ethernet transmission over long distances then converts to short-distance CAT-5/6 at either end
3. Capacity for both video camera and video display
The Ethernet video signals from an IP camera and to a video display screen in an elevator cab connect to a transceiver which carries the signals up the shaft using only one pair of shielded, twisted wires in the traveling cable, usually #18 AWG, to a second transceiver in the elevator machine room where the Ethernet signals join the building's Video Management System.
The Long-Reach Ethernet Extender transmits Ethernet at rates as high as 100/75 Mbps over 1000’ (300m) over a single-pair phone line, supporting both symmetric and asymmetric transmission and selectable SNR options.
1. Various IP camera styles and models
2. Optional POE powered
EmerCom can recommend the appropriate camera(s) for your applications and supply if required. Contact sales for help on product selection.
1. Can be installed in COP or car ceiling
2. Quick connection with EmerCom's Hands-free Phones
A Hearing-Aid Induction Loop connected to the emergency phone in an elevator creates a magnetic field to transmit the voice to a hearing-aid with “Telecoil” activated to amplify the signal and override the background noise. The EmerCom Emergency Phone has a connection for the Annunciator which is then also transmitted by the loop.
Member of
Canadian Elevator
Contractor
Association
